Features
X-pole freestanding architecture
Inner-first pitch, fully freestanding on any surface; no terrain anchoring required during setup.
CompWeave™ 30D nylon-polyester fly, 2,000mm HH
Proprietary composite with higher abrasion resistance than equivalent-weight pure nylon; weld-bonded seam construction.
30D Ripstop Nylon floor, 3,000mm HH
Rated for ground moisture across multi-night camps; weld-bonded floor construction.
30 mph (13.5 m/s) wind-tested
X-pole dome distributes lateral load symmetrically; covers Force 6–7 conditions across three-season below-treeline terrain.
Nanomesh upper canopy, 30D solid high-wall perimeter
Mesh overhead ventilates; solid fabric at the base retains warmth and closes cold-air infiltration at ground level.
Inner-outer separate construction
Independent fly and canopy maintain a ventilation gap across all wind conditions, reducing condensation contact on the sleep surface.
2P and 3P configurations
Same pole architecture and pitch sequence in both; 2P from 3 lb 11 oz (1.67 kg) / 13.8×5.5×5.5 in (35×14×14 cm) packed, 3P from 4 lb 1 oz (1.83 kg) / 14.2×5.5×5.5 in (36×14×14 cm) packed.
