Mobi Garden KONGAR UL EXO-FLEX™ BACKPACKING TENT

EXO-FLEX™ designates the ExoSpeedFlex pitch system. The outer fly erects and stands as an independent structure before the inner tent is involved. You clip the inner in from underneath, inside a standing shelter. In rain, the inner sleep surface has zero exposure at any point in the setup sequence — a meaningful difference from sleeve-and-clip systems where the inner contacts rain while the fly is still being tensioned.

Force 8 on the Beaufort scale is 40 mph (18 m/s) — gale conditions. The KONGAR was tested at that sustained speed across four continuous hours under frontal, lateral, and oblique load directions. Single-direction point-load testing at the same speed does not produce equivalent stress on pole junctions and anchor points.

FeatherFlex Pole (FFP™) is Mobi Garden's proprietary aluminum specification. Compared to conventional 7-series ultralight aluminum poles, FFP™ reduces weight by approximately 15% while increasing maximum load capacity to 466N. The KONGAR uses FFP™ throughout — no segments are standard alloy.

Rain on the fly is a dynamic load — it runs off. Water pooling beneath the floor, combined with body weight compressing the material against wet ground, creates sustained hydrostatic pressure. The 4,000mm HH floor rating is calibrated to that specific threat; the 3,000mm HH fly rating is calibrated to precipitation.

No. All KONGAR EXO-FLEX™ materials are non-PFAS and flame-retardant free.

No. The three-step ExoSpeedFlex sequence was developed for solo setup in deteriorating weather. The outer shell stands independently before the inner attaches, so no second person is needed to hold structure during the pitch.