เก้าอี้แบ็คแพ็คกิ้ง Mountain Wing Pro

เก้าอี้แบ็คแพ็คกิ้ง Mountain Wing Pro

3,062.00 ฿
ราคาโปรโมชัน  3,062.00 ฿ ราคาปกติ 
ข้ามไปยังข้อมูลสินค้า

เก้าอี้แบ็คแพ็คกิ้ง Mountain Wing Pro

3,062.00 ฿
ราคาโปรโมชัน  3,062.00 ฿ ราคาปกติ 
BACK TO ADVENTURE
Spend $200+ & get 15% OFF
Spend $400+ & automatically get 20% OFF
Best eligible offer applies at checkout.

น้ำหนักเริ่มต้น 1 ปอนด์ 7 ออนซ์ (639 กรัม) รับน้ำหนักได้สูงสุด 300 ปอนด์ (140 กก.) ผ้า Dyneema® G-Grid ทนทานต่อการฉีกขาดสูงสุด 1200N บนโครงอะลูมิเนียมอัลลอยด์ 7001 พร้อมขั้วต่อ X-HUB ที่ผ่านการกัดด้วยเครื่อง CNC แบบห้าแกน ระบบปรับระดับ All-Terrain สามารถหมุนขาที่เชื่อมต่อกันของแต่ละข้างได้สูงสุด 20° เพื่อให้สัมผัสพื้นสี่จุดอย่างเต็มที่บนพื้นที่ไม่สม่ำเสมอ สมอบก FFP™ ในตัวหนึ่งอันจะเก็บไว้ในฝา X-HUB และยึดกับห่วงตาไก่ที่ขาเพื่อกันลม

วัสดุเบาะนั่ง
Dyneema® G-Grid
น้ำหนักต่ำสุด
640 กรัม / 1 ปอนด์ 6.6 ออนซ์
ความมั่นคง
ระบบปรับสมดุลทุกสภาพพื้นผิว
แรงทำลายสูงสุด
สูงสุด 1200N

เทือกเขาเหิงต้วนไม่มีพื้นราบ แคมป์ใกล้เคียงตั้งอยู่บนธารน้ำแข็งโมเรน — หินร่วน มุมต่างกัน พื้นผิวที่เลื่อนไหล ในการทดสอบภาคสนามครั้งแรกของ Mountain Wing ต้นแบบ ผู้ออกแบบวางเก้าอี้ลงบนสันเขาเหิงต้วนแล้วหันหลังกลับ ลมกระโชกแรงพัดมันลงไปสามเมตรภายในเวลาไม่ถึงสองวินาที
เขาดึงหมุดเต็นท์ออกจากเป้แล้วตรึงเก้าอี้ไว้กับพื้น มันอยู่ได้
ช่วงเวลานั้นสร้างสิ่งสองอย่าง ระบบปรับระดับทุกสภาพพื้นผิว — ขาทุกข้างหมุนได้อย่างอิสระสูงสุด 20 องศา อ่านสภาพพื้นผิวโดยอัตโนมัติเพื่อให้จุดสัมผัสทั้งสี่จุดยังคงสัมผัสอยู่เสมอไม่ว่าพื้นดินจะเป็นอย่างไร และระบบหมุดในตัว: หมุดสองอันเก็บไว้เรียบสนิทในฝา X-HUB สามารถกางออกได้ในไม่กี่วินาทีบนหน้าแปลนตาไก่ที่สร้างขึ้นในเท้าแต่ละข้างของขา เก้าอี้ที่ปรับให้เข้ากับพื้นดิน ยึดติดกับพื้นดินเมื่อลมพัด
ผ้า Dyneema® G-Grid เติมเต็มข้อกำหนด — โพลีเอทิลีนน้ำหนักโมเลกุลสูงพิเศษแบบชีวภาพที่ทอเป็นโครงสร้างตาข่ายผ่านฐานไนลอน มีความต้านทานการฉีกขาด 1200N บนโครงอะลูมิเนียมอัลลอยด์ 7001 ลวดลาย G-Grid บนพื้นผิวคือรูปทรงของน้ำหนัก น้ำหนักคือ 639 กรัม อัตราการรับน้ำหนักคือ 140 กิโลกรัม

Features

Dyneema® G-Grid fabric

Bio-circular UHMWPE woven in a structural lattice through base nylon; up to 1200N tear resistance, UV stable, water resistant.

All-Terrain Leveling System

Same-side leg pairs rotate together up to 20°, linked through the X-HUB; four-point contact maintained on moraine, angled rock, and uneven forest terrain without manual adjustment.

Integrated FFP™ ground stake

One purpose-built stake (100mm × 6mm, 1mm wall, FFP aluminum process) stores flush in the sealed X-HUB cap; deploys onto the leg-foot eyelet flange to anchor against wind displacement.

X-HUB five-axis CNC construction

High-pressure forged aluminum hub with precision-machined connectors eliminates micro-play at junctions under cyclic load.

7001 aluminum alloy frame

Higher tensile strength than the 7075 alloy standard in this category; purpose-built for repeated compression-release cycles.

From 1 lb 7 oz (639g), 300 lbs (140kg) rated

Packs to 4.3×4.3×14.2 in (11×11×36 cm).

Min Weight
From 639.6g / 1lb 7oz
Adaptive Tech
All-Terrain Leveling System

Dimensions

Imperial Metric
IMPERIAL
Assembled Height 25.6 inch
Assembled Width 20.1 inch
Assembled Depth 19.1 inch
IMPERIAL
Packed Height 4.3 inch
Packed Length 14.2 inch
Packed Width 4.3 inch
IMPERIAL
Packed Weight 1 lb 7 oz / 1.4 lbs
Weight Capacity 300 lbs
Minimum Weight 1 lb 7 oz
METRIC
Assembled Height 65cm
Assembled Width 51cm
Assembled Depth 48.5cm
METRIC
Packed Height 11cm
Packed Length 36cm
Packed Width 11cm
METRIC
Packed Weight 656g
Weight Capacity 140kg
Minimum Weight 639.6g
Fabric Material
Dyneema® G-Grid
Breaking Force
Up to 1200N

คำถามที่พบบ่อย

How does the All-Terrain Leveling System work?

The two legs on each side move as a linked pair, both anchored to the central X-HUB. On uneven ground, the front pair and rear pair are adjusted independently — no tools required — until all four feet contact the surface. The system maintains stable four-point load distribution rather than bridging on a diagonal across uneven terrain.

What happens if I lose a ground stake in the field?

The included stakes are purpose-built: 100mm length, 6mm diameter, 1mm wall thickness, manufactured to FeatherFlex Pole (FFP™) specification — the same proprietary lightweight aluminum used in the tent pole line. A standard tent stake through the leg-foot eyelet flange will anchor the chair in a pinch, though we'd rather you just didn't lose them. If you need a replacement set, reach out to us at SUPPORT@MOBIGARDEN.COM.

What's the actual difference between Mountain Wing and Mountain Wing Pro?

Two primary differences: fabric and load rating. Mountain Wing Pro uses Dyneema® G-Grid at up to 1200N tear resistance; Mountain Wing uses DuroWeave™ 300D polyester at up to 600N. Load rating is 300 lbs (140 kg) for Pro vs. 250 lbs (110 kg). Frame alloy (7001), hub geometry (X-HUB), leveling system (All-Terrain, 20° per leg), seating dimensions, and packed size are identical across both.

Why 7001 aluminum instead of the 7075 alloy common in this category?

7001 alloy has higher tensile strength than 7075 at equivalent cross-section — it's less common in outdoor furniture because it's harder to work. The Mountain Wing Pro frame is designed for repeated compression-release cycles across multiple seasons; 7001 is the higher-spec alloy for that loading pattern.

Is the 300 lbs (140 kg) load rating per person or per chair?

Per chair.

สร้างชุดอุปกรณ์ของคุณ