เก้าอี้แบ็คแพ็คกิ้ง Mountain Wing Pro

เก้าอี้แบ็คแพ็คกิ้ง Mountain Wing Pro

3,062.00 ฿
ราคาโปรโมชัน  3,062.00 ฿ ราคาปกติ 
ข้ามไปยังข้อมูลสินค้า

เก้าอี้แบ็คแพ็คกิ้ง Mountain Wing Pro

3,062.00 ฿
ราคาโปรโมชัน  3,062.00 ฿ ราคาปกติ 
BACK TO ADVENTURE
Spend $200+ & get 15% OFF
Spend $400+ & automatically get 20% OFF
Best eligible offer applies at checkout.

จาก 1 ปอนด์ 7 ออนซ์ (639 กรัม) รับน้ำหนักได้สูงสุด 300 ปอนด์ (140 กก.) ผ้า Dyneema® G-Grid มีความทนทานต่อการฉีกขาดสูงสุด 1200N บนโครงอะลูมิเนียมอัลลอยด์ 7001 พร้อมตัวเชื่อมต่อ X-HUB ที่กลึงด้วย CNC ห้าแกน ระบบปรับระดับ All-Terrain จะหมุนคู่ขาที่เชื่อมโยงกันในแต่ละด้านได้สูงสุด 20° เพื่อการสัมผัสแบบสี่จุดบนพื้นที่ไม่เรียบอย่างเต็มที่ หมุดปักพื้น FFP™ แบบรวมหนึ่งอันเก็บอยู่ในฝาปิด X-HUB และยึดกับห่วงตาไก่ที่ขาในสภาพลมแรง

วัสดุที่นั่ง
Dyneema® G-Grid
น้ำหนักต่ำสุด
662 กรัม / 1 ปอนด์ 7.3 ออนซ์
ความมั่นคง
ระบบปรับสมดุลทุกสภาพพื้นผิว
แรงสูงสุดในการทำลาย
สูงสุด 1200N

เทือกเขาเฮงต้วนไม่มีพื้นที่ราบเรียบ แคมป์ที่ใช้เข้าถึงตั้งอยู่บนธารน้ำแข็ง — หินหลวม, มุมที่หลากหลาย, พื้นผิวที่เคลื่อนที่ได้ ในการทดสอบภาคสนามครั้งแรกของ Mountain Wing ต้นแบบ ผู้ออกแบบได้วางเก้าอี้ลงบนสันเขาเฮงต้วนแล้วหันหลังให้ ลมกระโชกแรงพัดพาไปไกลถึงสามเมตรภายในเวลาไม่ถึงสองวินาที
เขาดึงสมอบกออกจากเป้แล้วตรึงเก้าอี้ไว้กับพื้น มันอยู่ได้
ช่วงเวลานั้นได้สร้างสองสิ่งขึ้นมา นั่นคือ All-Terrain Leveling System — ขาแต่ละข้างหมุนได้อย่างอิสระสูงสุด 20° โดยปรับตามสภาพพื้นผิวโดยอัตโนมัติ ทำให้จุดสัมผัสทั้งสี่จุดยังคงสัมผัสพื้นผิวอยู่เสมอไม่ว่าพื้นผิวจะเป็นอย่างไร และระบบสมอบกในตัว: สมอบกสองอันเก็บไว้ในฝา X-HUB โดยสามารถใช้งานได้ภายในไม่กี่วินาทีบนหน้าแปลนรูตาไก่ที่สร้างขึ้นในเท้าแต่ละข้างของเก้าอี้ เก้าอี้ที่ปรับตัวเข้ากับพื้นผิว ตรึงอยู่กับที่เมื่อลมพัด
ผ้า Dyneema® G-Grid ช่วยเติมเต็มคุณสมบัติ — โพลีเอทิลีนน้ำหนักโมเลกุลสูงพิเศษแบบชีวภาพที่ทอเป็นโครงสร้างตาข่ายผ่านฐานไนลอน มีความต้านทานการฉีกขาด 1200N บนโครงสร้างอะลูมิเนียมอัลลอยด์ 7001 รูปแบบ G-Grid บนพื้นผิวคือรูปทรงรับน้ำหนัก น้ำหนัก 639 กรัม พิกัด 140 กิโลกรัม

Features

Dyneema® G-Grid fabric

Bio-circular UHMWPE woven in a structural lattice through base nylon; up to 1200N tear resistance, UV stable, water resistant.

All-Terrain Leveling System

Same-side leg pairs rotate together up to 20°, linked through the X-HUB; four-point contact maintained on moraine, angled rock, and uneven forest terrain without manual adjustment.

Integrated FFP™ ground stake

One purpose-built stake (100mm × 6mm, 1mm wall, FFP aluminum process) stores flush in the sealed X-HUB cap; deploys onto the leg-foot eyelet flange to anchor against wind displacement.

X-HUB five-axis CNC construction

High-pressure forged aluminum hub with precision-machined connectors eliminates micro-play at junctions under cyclic load.

7001 aluminum alloy frame

Higher tensile strength than the 7075 alloy standard in this category; purpose-built for repeated compression-release cycles.

From 1 lb 7 oz (639g), 300 lbs (140kg) rated

Packs to 4.3×4.3×14.2 in (11×11×36 cm).

Min Weight
From 639.6g / 1lb 7oz
Adaptive Tech
All-Terrain Leveling System

Dimensions

Imperial Metric
IMPERIAL
Assembled Height 25.6 inch
Assembled Width 20.1 inch
Assembled Depth 19.1 inch
IMPERIAL
Packed Height 4.3 inch
Packed Length 14.2 inch
Packed Width 4.3 inch
IMPERIAL
Packed Weight 1 lb 8 oz / 1.5 lbs
Weight Capacity 300 lbs
Minimum Weight 1 lb 7 oz
METRIC
Assembled Height 65cm
Assembled Width 51cm
Assembled Depth 48.5cm
METRIC
Packed Height 11cm
Packed Length 36cm
Packed Width 11cm
METRIC
Packed Weight 678.2g
Weight Capacity 140kg
Minimum Weight 661.8g
Fabric Material
Dyneema® G-Grid
Breaking Force
Up to 1200N

คำถามที่พบบ่อย

How does the All-Terrain Leveling System work?

The two legs on each side move as a linked pair, both anchored to the central X-HUB. On uneven ground, the front pair and rear pair are adjusted independently — no tools required — until all four feet contact the surface. The system maintains stable four-point load distribution rather than bridging on a diagonal across uneven terrain.

What happens if I lose a ground stake in the field?

The included stakes are purpose-built: 100mm length, 6mm diameter, 1mm wall thickness, manufactured to FeatherFlex Pole (FFP™) specification — the same proprietary lightweight aluminum used in the tent pole line. A standard tent stake through the leg-foot eyelet flange will anchor the chair in a pinch, though we'd rather you just didn't lose them. If you need a replacement set, reach out to us at SUPPORT@MOBIGARDEN.COM.

What's the actual difference between Mountain Wing and Mountain Wing Pro?

Two primary differences: fabric and load rating. Mountain Wing Pro uses Dyneema® G-Grid at up to 1200N tear resistance; Mountain Wing uses DuroWeave™ 300D polyester at up to 600N. Load rating is 300 lbs (140 kg) for Pro vs. 250 lbs (110 kg). Frame alloy (7001), hub geometry (X-HUB), leveling system (All-Terrain, 20° per leg), seating dimensions, and packed size are identical across both.

Why 7001 aluminum instead of the 7075 alloy common in this category?

7001 alloy has higher tensile strength than 7075 at equivalent cross-section — it's less common in outdoor furniture because it's harder to work. The Mountain Wing Pro frame is designed for repeated compression-release cycles across multiple seasons; 7001 is the higher-spec alloy for that loading pattern.

Is the 300 lbs (140 kg) load rating per person or per chair?

Per chair.

สร้างชุดอุปกรณ์ของคุณ