마운틴 윙 프로 백패킹 의자

마운틴 윙 프로 백패킹 의자

$89.99
할인가  $89.99 정가 
제품 정보로 건너뛰기

마운틴 윙 프로 백패킹 의자

$89.99
할인가  $89.99 정가 

무게 639g(1파운드 7온스), 지지 하중 140kg(300파운드). Dyneema® G-Grid 원단은 7001 알루미늄 합금 프레임과 5축 CNC 가공 X-HUB 커넥터로 1200N의 인열 강도에 도달합니다. 전지형 수평 조절 시스템은 각 측면의 연결된 다리 쌍을 최대 20°까지 회전시켜 고르지 않은 지면에서도 4개 지점 모두 접지됩니다. 통합 FFP™ 접지 말뚝은 X-HUB 캡에 보관되며 바람이 불 때 다리-발 아일릿에 고정됩니다.

좌석 소재
Dyneema® G-Grid
최소 중량
662g / 1lb 7.3oz
안정성
전천후 수평 조절 시스템
최대 파괴력
최대 1200N

횡단산맥에는 평평한 지면이 없습니다. 접근 캠프는 빙퇴석, 즉 느슨한 암석, 다양한 경사, 움직이는 표면에 자리 잡고 있습니다. 마운틴 윙 프로토타입의 첫 번째 장기 현장 테스트에서 디자이너는 의자를 횡단산맥의 능선에 놓고 돌아섰습니다. 지속적인 돌풍으로 의자가 2초도 안 되어 3미터 아래로 밀려났습니다.
그는 배낭에서 텐트 말뚝을 꺼내 의자를 땅에 고정했습니다. 의자는 꼼짝하지 않았습니다.
그 순간 두 가지가 탄생했습니다. 지형에 관계없이 4개의 접점이 유지되도록 각 다리가 최대 20°까지 독립적으로 회전하여 지형을 자동으로 읽는 전지형 수평 조절 시스템(All-Terrain Leveling System)과 X-HUB 캡에 평평하게 보관되어 몇 초 만에 각 다리 발에 내장된 아일렛 플랜지에 배치되는 통합 말뚝 시스템입니다. 바람이 불 때 의자를 지면에 고정하여 지면에 적응하는 의자입니다.
Dyneema® G-Grid 패브릭은 7001 알루미늄 합금 프레임에 걸쳐 바이오 순환 초고분자량 폴리에틸렌을 베이스 나일론을 통해 구조적인 격자로 직조하여 1200N의 인열 강도를 달성합니다. 표면의 G-Grid 패턴은 하중 지오메트리입니다. 무게는 639g이고 정격 하중은 140kg입니다.

Features

Dyneema® G-Grid fabric

Bio-circular UHMWPE woven in a structural lattice through base nylon; up to 1200N tear resistance, UV stable, water resistant.

All-Terrain Leveling System

Same-side leg pairs rotate together up to 20°, linked through the X-HUB; four-point contact maintained on moraine, angled rock, and uneven forest terrain without manual adjustment.

Integrated FFP™ ground stake

One purpose-built stake (100mm × 6mm, 1mm wall, FFP aluminum process) stores flush in the sealed X-HUB cap; deploys onto the leg-foot eyelet flange to anchor against wind displacement.

X-HUB five-axis CNC construction

High-pressure forged aluminum hub with precision-machined connectors eliminates micro-play at junctions under cyclic load.

7001 aluminum alloy frame

Higher tensile strength than the 7075 alloy standard in this category; purpose-built for repeated compression-release cycles.

From 1 lb 7 oz (639g), 300 lbs (140kg) rated

Packs to 4.3×4.3×14.2 in (11×11×36 cm).

Min Weight
From 639.6g / 1lb 7oz
Adaptive Tech
All-Terrain Leveling System

Dimensions

Imperial Metric
IMPERIAL
Assembled Height 25.6 inch
Assembled Width 20.1 inch
Assembled Depth 19.1 inch
IMPERIAL
Packed Height 4.3 inch
Packed Length 14.2 inch
Packed Width 4.3 inch
IMPERIAL
Packed Weight 1 lb 8 oz / 1.5 lbs
Weight Capacity 300 lbs
Minimum Weight 1 lb 7 oz
METRIC
Assembled Height 65cm
Assembled Width 51cm
Assembled Depth 48.5cm
METRIC
Packed Height 11cm
Packed Length 36cm
Packed Width 11cm
METRIC
Packed Weight 678.2g
Weight Capacity 140kg
Minimum Weight 661.8g
Fabric Material
Dyneema® G-Grid
Breaking Force
Up to 1200N

자주 묻는 질문

How does the All-Terrain Leveling System work?

The two legs on each side move as a linked pair, both anchored to the central X-HUB. On uneven ground, the front pair and rear pair are adjusted independently — no tools required — until all four feet contact the surface. The system maintains stable four-point load distribution rather than bridging on a diagonal across uneven terrain.

What happens if I lose a ground stake in the field?

The included stakes are purpose-built: 100mm length, 6mm diameter, 1mm wall thickness, manufactured to FeatherFlex Pole (FFP™) specification — the same proprietary lightweight aluminum used in the tent pole line. A standard tent stake through the leg-foot eyelet flange will anchor the chair in a pinch, though we'd rather you just didn't lose them. If you need a replacement set, reach out to us at SUPPORT@MOBIGARDEN.COM.

What's the actual difference between Mountain Wing and Mountain Wing Pro?

Two primary differences: fabric and load rating. Mountain Wing Pro uses Dyneema® G-Grid at up to 1200N tear resistance; Mountain Wing uses DuroWeave™ 300D polyester at up to 600N. Load rating is 300 lbs (140 kg) for Pro vs. 250 lbs (110 kg). Frame alloy (7001), hub geometry (X-HUB), leveling system (All-Terrain, 20° per leg), seating dimensions, and packed size are identical across both.

Why 7001 aluminum instead of the 7075 alloy common in this category?

7001 alloy has higher tensile strength than 7075 at equivalent cross-section — it's less common in outdoor furniture because it's harder to work. The Mountain Wing Pro frame is designed for repeated compression-release cycles across multiple seasons; 7001 is the higher-spec alloy for that loading pattern.

Is the 300 lbs (140 kg) load rating per person or per chair?

Per chair.

나만의 장비 세팅